
SME IPO
Kheria Autocomp IPO
Prices in INR · Times in IST
GMP updated: 24 Sep 2026, 08:24 AM IST
- Price band
- ₹96 – ₹101
- Application estimate
- ₹2,42,4002 lot(s) · 1200 sh
- GMP · unofficial
- ₹3 (+2.97%)
- Est. listing price
- ₹104Issue price + GMP
- Issue size
- ₹46.44 Cr
- Total subscription
- 2.55×
GMP trend & intraday history
Hover or tap on the chart to inspect a reading. Dates use calendar spacing; large gaps are not connected.
- High in this view
- ₹10 (₹24,000)
- Low in this view
- ₹3 (₹7,200)
- Reference issue price
- ₹101
- Readings in this view
- 10
- Subject to sauda
- 2700
Issue at a glance
IPO timetable & schedule
Subscription by investor category
Source updated: 17 Nov 2026, 04:21 PM IST
Overall Demand: 2.55×Mainboard figures are consolidated. NSE and BSE demand is not added together. Rupee demand is calculated from bid shares and the cap price; it is not an exchange-published amount. Application source: boa.
QIB funding cost illustration
Arithmetic for a fully funded institutional bid over 7 days; not a recommendation or a retail return estimate.
- Days
- 7
- Interest Rate
- Not published
- Cost Per Share
- 106.05
Day-wise subscription history
One snapshot near each bidding day’s close. This is not a continuous intraday series.
Plan your application
SME individual applications use 2 lots and must exceed ₹2 lakh under the NSE process effective July 2025.
The source application tiers need verification: a one-lot retail tier does not match the newer SME process. Use the rule-based estimate above and confirm the offer document.
One lot: ₹1,21,200 · Allocation is not guaranteed. Broker cut-off times may differ.
Source-published application tiers
Before you place an IPO application
- Read the issue. Check the offer document, business risks, price band and your application category.
- Apply through your broker or bank. Use your existing broker’s IPO section or your bank’s ASBA facility. This page does not submit a bid.
- Check the payment step. If using UPI, confirm the mandate in your UPI app and check that the funds are blocked. A saved bid alone is not confirmation.
- Track what happens next. Keep your application number. Use the registrar’s official page for allotment and the published timeline for refunds, demat credit and listing.
GMP return scenario
What could this amount look like?
GMP-based scenario · Not a forecast
Assumes all requested shares are allotted and listing equals issue price + GMP. Actual allotment, listing price, fees and taxes can change the result.
Your IPO progress
Keep your own record of this IPO. Statuses are entered by you, not verified with a broker or registrar. Saved on this browser for your signed-in account; not synced across devices.
IPO reservation & shares offered
Shares offered by category
Category-wise allocation percentages follow SEBI ICDR norms as stated in the offer document.
Promoter holding & ownership
Tara Chand Kheria, Vinay Kheria, Sushma Kheria and Santosh Devi Kheria
Anchor investors & allocations
- Anchor entities
- 0
- Total allocation (₹ crore)
- 0
- Mutual fund allottees
- 0
- Official allocation document
- Anchor document: not published
Investor allocations
No data has been published for this section yet.
By fund house
No data has been published for this section yet.
Financials & valuation
Figures in Rs. Crore · Changes compare matching annual period-end dates only.
- Profit After Tax
- 11.42Latest: 31 Mar 2026+38.59% YoY · Prior 8.24
- EBITDA
- 22.9Latest: 31 Mar 2026+41.53% YoY · Prior 16.18
- Total Borrowing
- 35.03Latest: 31 Mar 2026+13.37% YoY · Prior 30.9
Rs. Crore
Key valuation & financial KPIs
- P/E Ratio
- 14.01
- EPS (₹)
- 7.21
- RoE
- 33.72%
- RoCE
- 26.89%
- RoNW
- 33.72%
- PAT Margin
- 9.52%
- EBITDA Margin
- 19.08%
- Debt / Equity
- 0.89
- NAV (₹)
- 35.13
What does the company do?
Kheria Autocomp Ltd was started in 2009. It is an auto ancillary company working in plastic injection moulding, which means it melts plastic granules and forms them into vehicle parts, and also carries out sub-assembly work on those parts. It works as a Tier-II supplier. That means it does not sell to the car makers directly but supplies moulded components to Tier-I vendors, who then supply the original equipment manufacturers. Its parts go into passenger vehicles. Its product range covers interior cabin trims, exterior plastic parts, under-hood components and heating, ventilation and air conditioning ducts, and it supplies these for both internal combustion engine vehicles and electric vehicles, so it is not tied to one type of powertrain. Its manufacturing facility is inside the Tata Vendor Park at Sanand in Gujarat, covering about 3 acres, with 30 injection moulding machines ranging from 120 tons to 1,700 tons of clamping force. The company has also put up a 636 kW solar power system and four groundwater recharge wells at the site. As on 31 March 2026 it had about 113 employees.
More about the business
Kheria Autocomp Ltd is a Tier-II auto ancillary making plastic injection moulded components and sub-assemblies for passenger vehicles, covering interior trims, exterior parts, under-hood components and HVAC ducts for both petrol and electric models. Its plant sits inside the Tata Vendor Park at Sanand, Gujarat with 30 moulding machines.
Where will the money go?
Strengths & risks
Business strengths
- Profit has more than tripled in two years, from Rs 3.31 crore in FY2024 to Rs 8.24 crore in FY2025 and Rs 11.42 crore in FY2026.
- Sales have almost doubled over the same period, from Rs 62.40 crore to Rs 120.30 crore.
- EBITDA has more than doubled, from Rs 9.76 crore in FY2024 to Rs 22.90 crore in FY2026.
- Return ratios are strong, with RoNW of 33.72% and RoCE of 26.89%, and a PAT margin of 9.52%.
- The issue is priced moderately at about 14.01 times earnings on an EPS of Rs 7.21.
- Being located inside the Tata Vendor Park at Sanand puts it right next to its customer base, which cuts logistics cost and helps with just-in-time supply.
- It supplies parts for both petrol and electric vehicles, so the shift to EVs does not make its products redundant.
- The plant is well equipped with 30 injection moulding machines from 120 to 1,700 tons, and a 636 kW solar system reduces the power bill.
Risks to understand
- Being a Tier-II supplier means it sells to Tier-I vendors rather than to the vehicle makers, so it sits one step further from the customer and has less say on price.
- Having its plant inside the Tata Vendor Park is convenient but also means heavy dependence on one manufacturer ecosystem. Any change in that relationship would be serious.
- Almost the entire issue goes into one project. Rs 39.96 crore of the Rs 46.44 crore raised goes into a new facility at GIDC Sanand, which brings execution risk and a gap before it earns.
- Borrowing was Rs 35.03 crore against a net worth of Rs 39.52 crore, a debt to equity ratio of 0.89, and it has nearly doubled in two years.
- Demand follows the passenger vehicle cycle. A slowdown in car sales passes straight through to a component supplier.
- The raw material is polymer, which is linked to crude oil prices.
- The company is small, with about 113 employees and a single facility of roughly 3 acres.
- Promoter holding will come down from 100% to 70.99% after the issue.
- This is an SME issue. One lot is 1,200 shares, which is about Rs 1.21 lakh at the upper band of Rs 101, and SME shares usually trade in low volume after listing.
Source-provided company information. Read the RHP for the complete risk factors; these points are not a recommendation.
Listing performance
Actual listing figures appear after listing. Current gain is source-adjusted for corporate actions. CMP is a source snapshot, not a streaming quote.
Official documents, registrar & contacts
Offer documents
KFin Technologies Limited
Phone: 040-79615565
Email: kheria.ipo@kfintech.com
Allotment date: 22 Sep 2026
Lead manager details not yet published.
Plot No. B6, B7 & B8, Tata Vendor Park, Revenue Survey No.1, Village. Northkot Pura, Sanand, Ahmedabad, Gujarat, 382170
Phone: +91 98310 32670
Email: cs@kheria.com
Continue your IPO research
Explore more IPO companies
Related by issue type, with active issues first. These are research links, not investment recommendations.